16" Front Wheel Travel

16 Inches Front Wheel Travel

4wd 2 swayaway per wheel kit.JPG (76236 bytes)

This is the component picture of Autofab's F150 and Bronco 16" front wheel travel kit. This is intended for 1980 to 1996 model 4WD Broncos and F150's.

Qualities you will find :

4" of suspension lift

Better ground clearance

Bigger tires

More up travel

How about, it just looks like a race truck ?

16" front wheel travel

Better articulation for rock climbing

Smoothes out the big bumps

Better off road handling and control

Race quality design

2- 2.5 inch shocks per wheel

More shocks means less work on each one

More spring rate control

Handles higher unsprung weight of bigger tires and wheels .

Looks like a race truck !

Uses stock steering

Uses Stock Pitman Arm

Stock tie rods in the stock location

Uses factory power steering

Better steering geometry by design !

Cheaper also , are you starting to understand ?

Look at the ground clearance you get with an Autofab kit!

NO DROP DOWN BRACKETS !

Unheard of with conventional lifts

Traction Beams pivot from stock location !

Housings are modified (cut and turned) on an exchange basis for the 4" lift.

Better steering geometry , handling, more ground clearance by design

Optional skid plate for differential beam (painted red). Made from 3/16 steel, they fit perfect and double the protection !

Price: $2950 for the basic fabricated hardware, coils and shocks additional, exchange for stock traction beams.

Additional options available:

Coil Spring Adjusters $250 allow for fine tuning the ride height and adjustments after coil settles. Great feature to maintain proper camber alignment.

Reinforced traction beams $250. 1/4" steel plate gussets welded in weak areas of beam housings.

Compression Inserts for the coil springs. $130

BACK TO TOP